Lift Cylinder; The Drive Shaft Front Support Bearing; The Drive Shaft Rear Support Bearing; Steering Cylinder - Husqvarna P520 D Operator's Manual

Lift cylinder

• Remove the service hatch.
• 2 grease nipples, one on each side. Lubricate with a
grease gun until the grease is forced out.
The drive shaft front support
bearing
Lubricate with a grease gun until the grease is forced out.

The drive shaft rear support bearing

2 grease nipples. Lubricate with a grease gun until the grease
is forced out.
34 –
English
Lubrication

Steering cylinder

The steering cylinder has two grease nipples, one on each
end. Lubricate with a grease gun until the grease is forced
out.

Joint bearing

Grease the waist section of joint bearing Lubricate with a
grease gun until the grease is forced out.

Link brace

• 2 grease nipples, one on each side. Lubricate with a
grease gun until the grease is forced out.