Table of Contents
Advertisement
3.3.4 Storage Configuration
SATA Controller(s)
Use this item to enable or disable the SATA Controller feature.
SATA Mode Selection
This item is for SATA3_0 to SATA3_5 ports. Use this to select SATA mode. Configuration
options: [IDE], [AHCI] and [RAID]. The default value is [AHCI].
AHCI (Advanced Host Controller Interface) supports NCQ and other new features that will
improve SATA disk performance but IDE mode does not have these advantages.
SATA Aggressive Link Power Management
Use this item to configure SATA Aggressive Link Power Management.
SATA RX Value
Use this to select a different value if the SATA port has HDD compatibility issue.
Hard Disk S.M.A.R.T.
Use this item to enable or disable the S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting
Technology) feature. Configuration options: [Disabled] and [Enabled].
33
Advertisement
Table of Contents
