Table of Contents
Advertisement
3.3.4 Storage Configuration
SATA Controller
Use this item to enable or disable SATA Controllers.
SATA Mode Selection
Identify the SATA port is connected to Solid State Drive or Hard Disk Drive. Press
<Ctrl+I> to enter RAID ROM during UEFI POST process.
SATA ALPM
Use this item to enable or disable Aggressive Link Power Management.
sSATA Controller
Use this item to enable or disable SATA Controllers.
sSATA/M.2_SATA Mode Selection
Identify the SATA/M.2_SATA port is connected to Solid State Drive or Hard Disk Drive.
Press <Ctrl+I> to enter RAID ROM during UEFI POST process.
sSATA ALPM
Use this item to enable or disable Aggressive Link Power Management.
60
Advertisement
Table of Contents
