Table of Contents
Advertisement
LSI Controller
Use this item to enable or disable LSI controller. The default value is [Auto].
Bootable LSI Controller
Use this to enable or disable Onboard LSI Option ROM. If Option ROM is disabled, you
cannot use the SAS/SATA devices connected to the LSI controller as Boot Device.
3.3.5 Super IO Configuration
Serial Port 1 Configuration
Use this item to configure the onboard serial port 1.
Select and enter the "Serial Port 1 Configuration" and you will see the followings:
Serial Port
Use this item to enable or disable the onboard serial port.
Change Settings
Use this item to select an optimal setting for Super IO device.
SOL Configuration
Use this item to configrue parameters of SOL (Serial Over Lan).
Serial Port
Use this item to enable or disable the onboard serial port.
34
Advertisement
Table of Contents
