To prevent accidents stop the engine disconnect the spark plug
lead before attempting to carry out maintenance procedures
on the mower.
1.
Air Filter
2.
Fuel Cap
3.
Start Grip
4.
Oil Cap/ Dipstick
5.
Exhaust Guard
6.
Spark Plug / Lead
Throttle Cable Adjustment
Loosen casing clamp screw (1) and move the governor lever (2) in the
direction of screw (1) as far as posible. Move the throttle control to
the choke position. Tighten casing clamp screw.
Carburettor Adjustments
Should only be made by an authorised Briggs & Stratton dealer. Under
no circumstances should the engine be adjusted to run at a speed in
excess of that shown on the Declaration of Conformity.
MOWER
MAINTENANCE
Engine
2
1
6
1
3
4
5
2
1.19