1.25 Mower Maintenance; Engine; Throttle Cable Adjustment; Carburettor Adjustments - Hayter Harrier 41 Owner's Handbook Manual

To prevent accidents stop the engine disconnect the spark plug
lead before attempting to carry out maintenance procedures on
the mower.
1. Air Filter
2. Fuel Cap
3. Start Grip
4. Oil Cap/ Dipstick
5. Exhaust Guard
6. Spark Plug / Lead

Throttle Cable Adjustment

Loosen casing clamp screw (1) and move the governor lever (2) in the
direction of screw (1) as far as posible. Move the throttle control to
the choke position. Tighten casing clamp screw.

Carburettor Adjustments

Should only be made by an authorised Briggs & Stratton dealer. Under
no circumstances should the engine be adjusted to run at a speed in
excess of that shown on the Declaration of Conformity.
MOWER MAINTENANCE

Engine

2
1
6
1
3
4
5
2
1.19