Main Messages And Their Remedies - Olivetti d-Color MF25 User Manual

5
5.8

Main messages and their remedies

Message
Original left on glass.
Matching paper size is
not available.
Select paper size.
Original size cannot be
detected.
Select paper size.
This mode is not availa-
ble with XXX.
The Exit Tray has
reached its capacity.
Please remove all pages
%
from section tray.
Input User Name and
Password to login.
Input Account Name and
Password to login.
Your account has
reached its maximum
color-copy (black-copy)
allowance.
%
Close Section prop-
erly.
Please insert Fusing Unit
and close all doors.
Please install toner car-
tridge, and close all
doors.
Please insert Waste Ton-
er Box and close all
doors.
Please insert Image
Transfer Belt Unit and
close all doors.
5-44
Cause
The document was left on the
original glass.
Paper of a suitable size is not
loaded in a paper tray.
1 The document is not posi-
tioned correctly.
2 A document with a non-
standard size or with a size
too small to be detected is
loaded.
Functions that cannot be
used together are selected.
Since the maximum amount
of copies for the indicated fin-
isher exit tray has been ex-
ceeded, the machine is
unable to make copies.
User authentication settings
have been specified. Copies
cannot be made unless a
user name and its correct
password are entered.
Account track settings have
been specified. Copies can-
not be made unless an ac-
count name and its correct
password are entered.
The limit on the number of
copies that can be made has
been reached.
Since a machine door or cov-
er is open or an option is not
installed correctly, the ma-
chine is unable to make cop-
ies.
The fusing unit is not installed
correctly.
The indicated toner cartridge
is not installed correctly.
The waste-toner box is not in-
stalled correctly.
The image transfer belt unit is
not installed correctly.
Troubleshooting
Remedy
Remove the document from the
original glass.
Either select a different copy size or
feed paper of a suitable size from
the bypass tray.
1 Position the document correctly.
2 Select the correct paper size.
Make copies using only one of the
functions.
Remove all copies from the indicat-
ed tray.
Type in your user name and pass-
word. (See "Controlling the use of
this machine with user authentica-
tion" on page 2-37.)
Type in your account name and
password. (See "Limiting user ac-
cess with administrator settings (ac-
count track)" on page 2-41.)
Contact your administrator.
Make sure that all doors and covers
are closed and that all options are
installed correctly.
Reinstall the supplies or parts, or
contact your technical representa-
tive.
d-Color MF25