Assembling The Mower; Delivery Checklist; Handlebar; Grassbag Attachment - Hayter Harrier 41 Electric Owner's Handbook Manual

ASSEMBLING THE MOWER

Delivery Checklist

Handlebar

Grassbag Attachment

Supply Cable

1.10
Remove the mower from the packaging and check that the following
items have been supplied correctly. If any items are missing contact,
your local Hayter dealer.
1. Owner's Handbook.
2. Grassbag.
3. Supply Cable - (309C Only)
To prevent accidents cut off the long ribbon attached to the grass-
bag and discard.
Unscrew the handlebar securing knobs sufficiently to allow the han-
dlebar to pivot. Unfold the handlebar to the operating position, before
releasing. Tighten both handlebar knobs to secure in position.
Take care to ensure that the control cables do not become snagged
at the pivot point.
Raise the rear deflector, lower the grassbag through the handlebar and
hook in position. Lower the deflector to rest on the grassbag
Unpack the supply cable and identify the female socket end which is
to be attached to the mower. Fold back the hinged protector cap and
plug into the handlebar switch control unit. The hinged cap should
snap into position behind the control unit when fully engaged.
Route the supply cable loosely across to the cable cleat on the left side
of the handlebar. Make a loop in the supply cable and secure to the
cable cleat.