Grassbag; Without Grass Collection; Heavy Growth; Non-Grassed Areas - Hayter Harrier 41 Electric Owner's Handbook Manual

OPERATING THE MOWER

Grassbag

Raise the rear deflector and lift the grassbag through the handlebar
and lower the rear deflector to rest against the rear of the mower.
To empty the grassbag, pour out the grass clippings and shake the
grassbag vigorously to clean the airways. Good grass collection
depends on good air flow through the grassbag. When collecting
grass clippings it is important that the grassbag is emptied
80V21C
regularly to prevent blockages and motor overloading.

Without Grass Collection

Remove the grassbag and operate the mower with the rear
deflector in the closed position.
Heavey Growth
Areas of heavy growth should be mown without collecting the
clippings. If collection is required, first mow the area without the
grassbag at the maximum height of cut setting. Allow the grass
clippings to dry out and then mow the area at the maximum height
of cut setting with the grassbag fitted. Reduce the height of cut and
mow the area again as necessary until the required finish is
obtained.
To prevent grass damage do not remove more than one third of
grass height in one cut.

Non-Grassed Areas

When moving the mower across non-grassed areas, stop the motor
and set the mower to the maximum height of cut to protect the
cutting mechanism.
1.13