Height Of Cut; Before Mowing; Grassbag; Without Grass Collection - Hayter 481A Owner's Handbook Manual

Hayter mower lawn tractor owner's handbook
Table of Contents

Advertisement

OPERATING THE MOWER
+
-
305113
1.14

Height of Cut

Move the height of cut lever sideways to disengage it from the locking
notch, then push forwards to lower or pull backwards to raise the height
of cut. Release the lever in the required position and ensure that it locks
firmly into one of the seven notch settings.
Always select a height of cut to suit operating conditions. Prevent
engine overloading and blockages by avoiding low cuts in long grass
conditions. Be prepared to make two cuts when the grass is long.

Before Mowing

To prevent accidents thoroughly inspect the area and remove all
objects which when contacted by the mower cutterblade could
become dangerous projectiles. Inspect the area for hidden obstruc-
tions which when contacted by the cutterblade could risk health
and safety. Remember the location of these obstructions and
ensure that you mow around them.

Grassbag

Raise the rear deflector and lift the grassbag through the handlebar and
lower the rear deflector to rest against the rear of the mower.
To empty the grassbag, pour out the grass clippings and shake the
grassbag vigorously to clean the airways. Good grass collection
depends on good air flow through the grassbag. When collecting grass
clippings it is important that the grassbag is emptied regularly to pre-
vent blockages and engine overloading.

Without Grass Collection

Remove the grassbag and operate the mower with the rear deflector in
the closed position.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Harrier 48

Table of Contents

Save Article as PDF