Storage; Disposal; Troubleshooting Guide - Husqvarna 226HS75S Operator's Manual

English
1. Lubricate the blade bars to prevent rust with special grease, part no. 531 00 75-12 (UL21), before long periods of storage.
2. Empty the fuel tank and put the cap back on. Drain off the fuel in an approved container outdoors and well clear of naked
flames.
3. Remove the spark plug, pour a small amount of oil into the cylinder.
4. Rotate the crankshaft several times using the starting rope in order to distribute the oil. Put the spark plug back in.
5. Wrap the engine with a plastic sheet.
6. Store the trimmer indoors in a dry place, dust free place, out of the reach of children, preferably not in direct contact with the
floor and away from heat sources.
7. The transport guard should always be fitted to the cutting attachment when the machine is not in use.
When disposing your machine, fuel or oil for the machine, be sure to follow your local regulations.
Case 1. Starting failure
CHECK
fuel tank
fuel filter
idle adjustment screw
sparking (no spark)
spark plug
Case 2. Engine starts but does not keep running/Hard re-starting.
CHECK
fuel tank
idle adjustment screw
air cleaner
When your unit seems to need further service, please consult with our service shop in your area.
18

Storage

Disposal

Troubleshooting guide

PROBABLE CAUSES
➞ incorrect fuel
➞ fuel filter is clogged
➞ out of normal range
➞ spark plug is fouled/wet
➞ plug gap is incorrect
➞ disconnected
PROBABLE CAUSES
➞ incorrect fuel or staled fuel
➞ out of normal range
➞ clogged with dust
ACTION
➞ drain it and fill with correct fuel
➞ clean
➞ adjust to normal range
➞ clean/dry
➞ correct (GAP: 0.6 – 0.7 mm)
➞ retighten
ACTION
➞ drain it and fill with correct fuel
➞ adjust to normal range
➞ wash