Auxiliary Mode - Sharp AY-AP7FHR Operation Manual

AUXILIARY MODE

Use this mode when the remote control is not available.
TO TURN ON
Lift the front panel of the indoor unit and press the
AUX. button on the operation panel.
• The red OPERATION lamp (
light and the unit will start operating in the AUTO
mode.
• The fan speed and temperature setting are set to
AUTO.
TO TURN OFF
Press the AUX. button on the operation panel again.
• The red OPERATION lamp (
turn off.
NOTE:
If the AUX. button is pressed during normal opera-
tion, the unit will turn off.
) on the unit will
) on the unit will
E-14
(AY-AP7FHR/AY-AP9FHR)
(AY-AP12FHR)