R Egistration; Register; Remove Handset - RCA 25250 User Manual

Programming the Telephone
Registration (only applicable to handset)
A cordless handset will not operate until it is registered to the base. During
the registration process, keep the handset near the base. Up to 10 cordless
handsets can be registered to one base.
NOTE: If a handset has not been registered to the base, then the display will
show "PRESS "REG" TO INITIATE REGISTRATION" once the handset has been
activated. Press the REG soft key to start the registration.
From the Phone Setting Menu:
1. Press the VOL (- or +) button to scroll to Registration.
2. Press SELECT soft key and you may program the following items:
Register and Remove handset.

Register

From the Phone Setting Menu:
1. Press the VOL (- or +) button to scroll to Register.
2. Press SELECT soft key. "Press base unit page button until beep" shows
in the display.
3. Press and hold the Page button on base for 5 seconds.
4. "Registration" displays to indicate the base is now in registration mode.
5. If the registration is successful, the handset shows "Registration
complete" for 2 seconds and emits a confirmation tone.
6. If the registration is failed (i.e. timeout), the handset shows
"REGISTRATION FAILED!" for 2 seconds and emits an error tone.

Remove Handset

De-registration cancels registration. During the de-registration process,
keep the handset near the base.
WARNING: It is not recommended that a handset be deregistered
unless absolutely necessary because once a handset is deregistered,
that handset's telephone features cannot be used until the handset is
re-registered.
From the Phone Setting Menu:
1. Press the VOL (- or +) button to scroll to the Remove handset.
2. Press SELECT soft key button. "Remove handset?" shows on the display.
3. Press the YES soft key to confirm de-registration. "Saved" shows in the
display and then shows "Press "REG" to initiate registration" in the
handset.
NOTE: You can press the REG soft key to enter the registation mode again.
1