RCA 25252 Quick Start Manual

1. To set up your Answering System,
press the MENU soft key.
2. Using the VOL (+/-) buttons
to navigate, scroll to
ANSWERING SYS. and press
the SELECT soft key.
MAIN MENU
PHONE SETTING
DISPLAY SETTING
SOUND SETTING
ANSWERING SYS.
3. Press the SELECT soft key again on ON/OFF STATUS.
4. Choose the line on which you would like to activate or deactivate the
answering system.
NOTE: The answering system may be activated on both lines at the same time.
5. Scroll to ON or OFF to activate or deactivate your answering system
on this line, then press the SELECT soft key.
6. From the ANSWERING SYS. menu, scroll down to
the VOL (+/-) buttons to navigate and press the
ANSWERING SYS.
ON/OFF STATUS
OGA PLAYBACK
OGA RECORD
7. Choose which line you would like to record a greeting for and press the
SELECT soft key.
8. Choose which type of greeting you would like to record. Press the
SELECT soft key and record your message. Press the
end the recording and your message will be played back to you.
9. From the ANSWERING
the SELECT
ANSWERING SYS.
ON/OFF STATUS
OGA PLAYBACK
OGA RECORD
SET OGA
10. Scroll to the greeting you wish to use and press the
NOTE: DEFAULT is the initial OGA setting. ANNOUNCE ONLY will play a message,
but not allow the caller to leave a message. TIMED will allow you to set two
different greetings, one for office hours and one for after your business has closed.
Additional features for the answering system can be found in the manual
OGA RECORD using
starting on page 20.
SELECT soft key.
FINISH soft key to
SYS. menu, scroll down to SET OGA and press
soft key.
SELECT soft key.
25252