Media Protection Function - Sony PDW-U1 Operation Manual

2
Turn the cover of the manual eject
mechanism on the front panel
counterclockwise, as shown in the
figure.
Be careful not to turn the cover more
than necessary.
3
Check the position of the screw, then
using a Phillips screwdriver, turn the
screw counterclockwise until the disc
is ejected.
After ejecting the disc, it is not
necessary to return the screw to its
original position. The next time the
unit is powered on, normal operation
will resume.
4
Replace the cover.
3-4-6 Media Protection
Function
This unit is equipped with a media
protection function.
22 3-4 Handling Discs
The media protection function means that
when a disc is loaded in the unit, if you
press the 1 (power) button on the rear
panel, turning it off, or disconnect the
power cord to shut off the AC supply, the
unit switches automatically to standby-off
mode, and prevent a disc error.