Exiting; Automatically Starting The Utility Software (Windows Only) - Sony PDW-U1 Operation Manual

As administrator
Setting of User
Account Control
Enabled
Disabled
a) A dialog appears demanding permission to
continue with computer administrator
privileges after disabling User Account
Control.
If the permission is given, the utility software
will run and open the home window. In this
case, you can use all the functions of the utility
software.
If the permission is not given, the utility
software will inform which restrictions will be
imposed and then run. In this case, you cannot
change the settings in the User Settings screen
or use a log deletion function.
As standard user
Setting of User
Account Control
Enabled Demands After confirmation,
Disabled
a) A privilege escalation dialog appears, then the
utility software starts. You cannot change the
settings in the User Settings screen or use a log
deletion function.
On a Macintosh computer
Open the folder in which the utility
software is installed, and then double click
U1 Utility.
This displays the home window of the
utility software.
Note
You must log on to the computer as a user
with Computer Administrator privileges to
32 5-1 Starting and Exiting the Utility Software
Behavior of the
utility software
Demands
permission prior to
a)
running
Runs
Behavior of the
utility software
runs in restricted
a)
mode
be able to change the settings in the User
Settings screen of the utility software.

5-1-2 Exiting

On a Windows computer
Click the × (close) button in the top right
corner of the window.
On a Macintosh computer
From the U1 Utility menu, select "Exit U1
Utility."
5-1-3 Automatically
Starting the Utility
Software (Windows only)
When running under Windows, under the
following conditions the utility software
may start automatically, and display the
home window.
• When you insert an unformatted disc:
In the tree display in the home window,
select [Disc Operation Menu] t
[Format Screen], and then you can format
the inserted disc.
• When a pre-recorded disc inserted into
this unit is unable to be read correctly
for any reason:
In the tree display in the home window,
select [Disc Operation Menu] t
[Volume Recovery Screen], and then you
can check the contents of the disc.
Notes
• Volume recovery is intended principally
for use when the computer is unable to
read a disc correctly because data writing
did not complete correctly, usually as a
result of an unintentional power
interruption or USB interface