Chapter 5 Using The Software; Starting And Exiting The Utility Software; Starting - Sony PDW-U1 Operation Manual

Using the Software
5-1 Starting and
Exiting the Utility
Software

5-1-1 Starting

First make sure that this unit is connected to
the computer.
For connection details, see 3-2-1 "Connecting to a
Computer" (page 19).
On a Windows computer
With the computer connected to this unit,
carry out any of the following.
• Open the folder in which the utility
software is installed, then double click on
U1_Utility.exe.
• Click the Start button, and then select
"All Programs" > "Sony XDCAM
Drive" > "U1 Utility."
The utility software behaves as follows.
When using Windows XP
The behavior of the utility software depends
on the type of user accounts.
Type of user Behavior of the utility
account software
Limited Does not run
Computer Runs and opens the
administrator home window
Chapter
When using Windows Vista
The behavior of the utility software depends
on the setting of User Account Control
(enabled or disabled), and not on the type of
user account (computer administrator or
standard user).
Setting of User
Account Control
Enabled
Disabled
a) A dialog appears demanding permission to
continue with computer administrator
privileges after disabling User Account
Control.
If the permission is given, the utility software
will run and open the home window. In this
case, you can use all the functions of the utility
software.
If the permission is not given, the utility
software will inform which restrictions will be
imposed and then run. In this case, you cannot
change the settings in the User Settings screen
or use a log deletion function.
When using Windows 7
The behavior of the software depends on
the type of user account (computer
administrator or standard user) and on the
setting of User Account Control (enabled:
levels 1 to 3, disabled: level 0).

5-1 Starting and Exiting the Utility Software

5
Behavior of the
utility software
Demands
permission prior to
a)
running
Runs
31