Table of Contents
Advertisement
Password
Default setting: No password.
Setting up a password: When configuring the device, press Enter to login the
configuration for the first time. It is recommended that you set a password for
security and management purposes.
Password forgotten? If you forget the password, you can reset the device to the
factory setting. Refer to the section titled "Factory Reset" for details.
Local and Global Port Addresses
The LAN parameters for the product are pre-set in the factory. The default
values are shown below.
IP address
Subnet Mask
DHCP server function
IP addresses for
distribution to PCs
Information from ISP
Before you start configuring this device, you should review the information
given in the following tables and use it as a reference.
Local Port
192.168.1.254
255.255.255.0
Enabled
253 IP addresses continuing from 192.168.1.1 to
192.168.1.253
Global Port
The DHCP client
function is enabled
to automatically get
the Global port
configuration from
the ISP.
Advertisement
Table of Contents
