Table of Contents
Advertisement
Before you start setting up IP Sharing via browser-based web configuration,
make sure that:
•
Assuming the workstation's TCP/IP is set to obtain IP automatically and
the IP Sharing Device's Local Port is set to "Distribute IP" (default),
and all the cables are connected correctly, you are now ready to
configure this device via Web Browser. Open the browser, enter the
local port IP address (default at 192.168.1.254) of the IP Sharing Device,
and click "Go" to get the login page.
No user name is required. The default password is left blank. If you have set a
password, enter that and click OK to continue.
At the setup home page, the left navigation pane for bookmarks links you
directly to the desired setup page. You can select Global Port, Local Port,
Management, Virtual Server, Packet Filter, Static Router, Checking E-Mail,
Dynamic DNS, Network Status (WAN IP Status, Session List, User
Figure 3
Figure 4
Advertisement
Table of Contents
