Hawking H-BR49 User Manual page 28

Network Adapter Address Filter
IP Address Filter
Single/Range
IP Range
Direction
TCP/UDP Port Filter
Filter/Forward
Please note that performing the Factory
Reset will erase all previously entered
device settings.
Single/Range
Port Number
Port Type
Filter according to the local
computer's network adapter MAC
address (also known as the adapter
card's Physical Address).
Filter with the computer's IP address.
You can filter a single IP, or a range
of IP addresses.
Enter the Start and End IP addresses
for a range of IP addresses for
filter/forward.
From Local IP: filtering of an IP
address of a local computer; or
To Remote IP: filtering of an IP
address of a remote server (this
remote server connects to the device
via Internet).
Filter using the port number. You can
set the filter for a single port or a
range of ports.
Select to Filter or Forward for the
following assigned port(s).
You can filter a single port, or a range
of ports
The port number(s) for the filters.
TCP port: filter according to the
Connection-Based
Application Service on the
remote server using the port
number.
UDP port: filter according to
the Connectionless
Application Service on the
remote server using the port
number.