Lan Port - Hawking H-BR49 User Manual

Device/Computer Name
Domain Name
IP Address
Subnet Mask
Gateway
Primary/Secondary
SAVE
UNDO

LAN Port

This screen contains settings for the LAN interface corresponding to the local
network. You can change the setting to distribute the IP address to local PCs, if
desired. If "Distribute IP address to local computer" is selected, users can enter
the IP addresses assigned for the computers on the LAN. The number of IP
addresses decides the number of clients allowed for the assigned IP addresses.
Note that all the PCs on the same LAN should use the same subnet Mask.
Users can also set Static DHCPs on this page. Users are allowed to set 32 Static
DHCPs. Using this feature, the device will assign the same IP address to a
computer (according to the network adapter's MAC address) and this computer
becomes the only one able to request that IP address. This is quite useful to set
virtual servers which specifically require fixed IPs for outside Internet access.
Enter a descriptive name for
identification purposes. Some Internet
Service Providers (ISP) require this
information and if that is the case,
they will provide you with the name.
For example: yourcompany.com. The
maximum input for this field is 32
alphanumeric characters and it is case
insensitive
Enter the information provided by
your ISP.
Enter the information provided by
your ISP.
Enter the information provided by
your ISP.
Enter the information provided by
your ISP.
After completing the settings on this
page, click SAVE to save the settings.
Click UNDO to clear all the settings
on this page.