Bull 1GB Intel Ethernet Switch Module Installation And User Manual page 263

Table 9. Default settings for run-time switching software variables (continued)
Sub-
Heading heading
System
Configuration
Forwarding
Database
Port
Network
Connectivity
Run-time Switching Software Default Settings
Variable
Port Mode
Auto log-out
Configuration update
Default gateway
IP address
Subnet mask
System Contact
System Location
System Name
Forwarding Database
aging time
Configuration
Auto Negotiation
Flow control
LACP mode
Port Enable
Mirroring
Mirroring Mode
Java enable status
Default value
Disable config spanningtree port
mode
10 min
Disable
0.0.0.0
10.90.90.9x, where x
depends on the
number of the bay into
which you have
installed the switch
module.
Class A Network -
255.0.0.0, Class B
Network - 255.255.0.0,
Class C Network -
255.255.255.0
Blank config syscontact
Blank config syslocation
Blank config sysname
300 seconds config forwardingdb
agetime
Enable config port autoneg
Disable config port flowcontrol
Disable config port lacpmode
Enable config port adminmode
Disable config mirroring mode
Disable config network
javamode
Command
237