Show Macfilter; Multicast Forwarding Database (Mfdb) Commands; Show Mfdb Gmrp; Show Mfdb Igmpsnooping - Bull 1GB Intel Ethernet Switch Module Installation And User Manual

show macfilter

Use this command to display the Static MAC Filtering information. If <all> is selected as the first
parameter, all the Static MAC Filters in the switch module are displayed. If a <macaddr> is entered,
a VLAN ID must also be entered and the Static MAC Filter information will be displayed only for
that MAC address and VLAN ID pair.
Format show macfilter <all/macaddr <all/vlan>>
MAC Address
The MAC address of the static MAC filter entry.
VLAN ID The VLAN ID of the static MAC filter entry.
Destination Port(s)
The port(s) in the destination filter. Packets with the associated MAC address and
VLAN ID will only be transmitted out of ports in the list.

Multicast Forwarding Database (MFDB) commands

show mfdb gmrp

Use this command to display the GMRP entries in the Multicast Forwarding Database (MFDB)
table.
Format show mfdb gmrp
Mac Address
A MAC address and VLAN pair for which the switch has forwarding and/or
filtering information. The format is two, two-digit hexadecimal numbers,
representing the VLAN and six, two-digit hexadecimal numbers, representing the
MAC address, separated by hyphens; for example, 00-01-00-23-45-67-89-AB.
Type Displays the type of the entry. Static entries are those that are configured by the end
user. Dynamic entries are added to the table as a result of a learning process or
protocol.
Description The text description of this multicast table entry.
Interfaces The list of interfaces that are designated for forwarding (Fwd:) and filtering (Flt:).

show mfdb igmpsnooping

Use this command to display the IGMP Snooping entries in the MFDB.
Format show mfdb igmpsnooping
Mac Address
A MAC address and VLAN pair for which the switch has forwarding and/or
filtering information. The format is two, two-digit hexadecimal numbers,
representing the VLAN and six, two-digit hexadecimal numbers, representing the
MAC address, separated by hyphens; for example, 00-01-00-23-45-67-89-AB.
Type Displays the type of the entry. Static entries are those that are configured by the end
user. Dynamic entries are added to the table as a result of a learning process or
protocol.
Description The text description of this multicast table entry.
Interfaces The list of interfaces that are designated for forwarding (Fwd:) and filtering (Flt:).
Command Line Interface Management
193