show stats port detailed
Use this command to display detailed statistics for a specified port.
Format
show stats port detailed <port>
Packets Received
Octets Received
The total number of octets of data (including those in bad packets) received on the
network (excluding framing bits but including FCS octets). This object can be used
as a reasonable estimate of Ethernet utilization. If greater precision is desired, the
etherStatsPkts and etherStatsOctets objects should be sampled before and after a
common interval.
Packets Received 64 Octets
The total number of packets (including bad packets) received that were 64 octets in
length (excluding framing bits but including FCS octets).
Packets Received 65-127 octets
The total number of packets (including bad packets) received that were between 65
and 127 octets in length (excluding framing bits but including FCS octets).
Packets Received 128-255 Octets
The total number of packets (including bad packets) received that were between 128
and 255 octets in length (excluding framing bits but including FCS octets).
Packets Received 256-511 Octets
The total number of packets (including bad packets) received that were between 256
and 511 octets in length (excluding framing bits but including FCS octets).
Packets Received 512-1023 Octets
The total number of packets (including bad packets) received that were between 512
and 1023 octets in length (excluding framing bits but including FCS octets).
Packets Received 1024-1518 Octets
The total number of packets (including bad packets) received that were between
1024 and 1518 octets in length (excluding framing bits but including FCS octets).
Packets Received 1519-1522 Octets
The total number of packets (including bad packets) received that were between
1519 and 1522 octets in length (excluding framing bits but including FCS octets).
Packets Received >1522 Octets
The total number of packets (including bad packets) received that were >1522
octets in length (excluding framing bits but including FCS octets).
Packets Received Successfully
Total Packets Received Without Error
The total number of packets received that were without error.
Unicast Packets Received
The number of subnetwork-unicast packets delivered to a higher-layer protocol.
Multicast Packets Received
The number of packets received that were directed to a multicast address. Note that
this number does not include packets directed to the broadcast address.
Command Line Interface Management
173
Need help?
Do you have a question about the 1GB Intel Ethernet Switch Module and is the answer not in the manual?