Mac Filter Commands; Config Macfilter Adddest; Config Macfilter Create; Config Macfilter Deldest - Bull 1GB Intel Ethernet Switch Module Installation And User Manual

MAC filter commands

config macfilter adddest

Use this command to add the <port> to the destination filter set for the MAC filter with the MAC
address of <macaddr> and VLAN of <vlan>. The <macaddr> parameter must be specified as a 6-
byte hexadecimal number in the format of 00-12-34-56-78-90. The <vlan> parameter must identify
a valid VLAN.
The <port> parameter identifies the destination port(s) to be added to the destination port filter set
for the MAC filter. If <all> is selected, all ports will be added to the destination port filter set.
Packets for the specified MAC address and VLAN ID will only be transmitted out of ports that are in
the filter set.
Format config macfilter adddest <macaddr> <vlan> <port/listofports/all>

config macfilter create

Use this command to add a static MAC filter entry for a MAC address and VLAN pair. The
<macaddr> parameter must be specified as a 6-byte hexadecimal number in the format of 00-12-34-
56-78-90.
Filters may not be defined for MAC addresses:
• 00-00-00-00-00-00
• 01-80-C2-00-00-00 to 01-80-C2-00-00-0F
• 01-80-C2-00-00-20 to 01-80-C2-00-00-21
• FF-FF-FF-FF-FF-FF
The <vlan> parameter must identify a valid VLAN.
Up to 100 static MAC filters may be created.
Format config macfilter create <macaddr> <vlan>

config macfilter deldest

Use this command to remove one or more ports from the destination filter set for the MAC filter
with the MAC address of <macaddr> and VLAN of <vlan>. The <macaddr> parameter must be
specified as a 6-byte hexadecimal number in the format of 00-12-34-56-78-90. The <vlan>
parameter must identify a valid VLAN.
The <port> parameter identifies the destination port(s) to be removed from the destination port filter
set for the MAC filter. If <all> is selected, all ports will be removed from the destination port filter
set.
Format config macfilter deldest <macaddr> <vlan> <port/listofports/all>

config macfilter remove

Use this command to remove the static MAC filter entry for the given MAC address on the VLAN.
The <macaddr> parameter must be specified as a 6-byte hexadecimal number in the format of 00-
12-34-56-78-90. The <vlan> parameter must identify a valid VLAN.
Format config macfilter remove <macaddr> <vlan>
192
NovaScale Blade 1 GB Intel® Ethernet Switch Module: Installation and User's Guide