Table of Contents
Advertisement
Tap
to open the Traffic Summary screen.
2.2 Buttons and other controls on the screen
When you are using the software, you usually tap buttons on the touch screen.
You only need to confirm selections or changes if the application needs to restart, it needs to
perform a major reconfiguration, or you are about to lose some of your data or settings.
Otherwise, the software saves your selections and applies the new settings without
confirmation as soon as you use the controls.
Type
Example
Button
Button
with
value
Icon
List
Radio
button
Switch
Description
Tap it to initiate a function,
to open a new screen, or
to set a parameter.
Some buttons display the
current value of a field or
setting. Tap the button to
change the value. After the
change, the new value is
shown on the button.
Shows status information.
When you need to select
from several options, they
appear in a list.
When there are only a few
choices, radio buttons may
be used instead of lists.
Only one value can be
selected.
When there are only two
choices, a checkmark
shows whether the feature
is enabled.
9
How to use it
Tap it once.
Tap it once.
Some icons also function
as a button. Tap them
once.
Grab the list anywhere
and slide your finger up
or down. Depending on
the speed of the sliding,
the list will scroll fast or
slow, only a bit or till the
end.
Alternatively, move
between pages with the
and
buttons
and tap the value that
you want.
Tap one of the buttons to
select a new value.
Tap it to turn the switch
on or off.
Advertisement
Table of Contents
