Watching The Simulation Of The Route - ZENEC GPS NAVIGATION SYSTEM Main User Manual

3.8 Watching the simulation of the route

You can run a simulated navigation that demonstrates the active route. Do as follows:
1. If you are on the Map screen, tap
menu.
2. In the Navigation menu, tap
3. Tap
4. Scroll down the list and tap
point of the route, and using a realistic speed, it leads you through the whole
recommended route.
1. (optional) You have the following controls during the simulation (the control buttons
disappear after a few seconds but you can open them again if you tap the map):
: Jump to the next route event (manoeuvre).
: Pause the simulation.
.
63
to return to the Navigation
.
. The simulation starts from the starting