Route Settings - ZENEC GPS NAVIGATION SYSTEM Main User Manual

Button

4.3.4 Route settings

These settings determine how routes will be calculated.
Button
To let the route fit your needs, you can also set which road types are to be considered for or
to be excluded from the route if possible.
Excluding a road type is a preference. It does not necessarily mean total prohibition. If your
destination can only be accessed using some of the excluded road types, they will be used
but only as much as necessary. In this case a warning icon will be shown on the My Route
Use this switch to enable or disable the TMC receiver that can receive
real-time traffic information. The rest of the buttons below are all
related to the TMC function and are available only if the receiver is
enabled.
ZE-NC620DMH will automatically search for available TMC stations
and tune in to receive them. If you would like to determine which
station to use, turn off automatic tuning and use the left and right
arrows on the Traffic Summary screen for manual tuning. If automatic
tuning is turned off and you leave the reception area of the selected
frequency, ZE-NC620DMH cannot receive live traffic information until
you return into the area or you turn the automatic tuning on again.
When premium (paid) TMC is available at your location and you have
a valid subscription, ZE-NC620DMH will use this service instead of
the free public traffic information. If you want to use the public service
instead, turn this switch off and the paid services will be disregarded.
This setting determines how your software uses the received real-
time traffic information in route calculation. When calculating a new
route, or when recalculation becomes necessary based on the
received Traffic events, your software avoids traffic events if it makes
sense.
You can also set the minimum delay that triggers route recalculation,
and you can instruct the application if you want to confirm every
recalculation.
Tap this button to open the list of traffic event types, and select which
events to take into account in route calculation.
Tap this button for the list of available TMC service providers.
You can set the type of vehicle you will use to navigate the route.
Based upon this setting, some of the road types can be excluded
from the route, or some of the restrictions may not be taken into
account in route calculation.
The route calculation can be optimised for different situations and
vehicle types by changing the planning method. See below for
details.
Description
Description
75