Link Status; Site Survey - NetComm VELOCITY NP910n User Manual

Link Status

Under the Link Status tab, all information regarding the connectivity of the NetComm ���n Series USB Adapter is visible
• Status: Displays the linked AP name and mAC address. When [Disconnect] appears in this box, the connection is failed.
• Current Channel: Current channel in use.
• Link Speed: Shows current transmit rate and receive rate.
• Throughput: Displays transmit and receive throughput value.
• Link Quality: Displays connection quality based on signal strength and tX/rX packet error rate.
• Signal Strength 1 & 2: receive signal strength.
• Noise Level: Display noise signal strength.

Site Survey

The Site Survey tab is where all of the basic connection information can be found. In the main window, you can find listed;
• All of the available wireless networks that your NetComm ���n Series USB Adapter has in range
• The BSSID, or MAC address of all the available Access Point's
• the strength of the wireless signal from the Access Point.
• the channel at which the Access Point is running.
• Authentication/encryption Keys. If an Access Point requires a security setting, it will be listed as what type of setting is required.
• Network type. Lists whether the network is set as Infrastructure or Ad-Hoc.
YmL���WN ���WN
www.netcomm.com.au
NetComm Velocity Series - Wireless N USB Adapters
TM
Wireless N USB Adapters User Guide Wireless N USB Adapters User Guide Wireless N USB Adapters User Guide Wireless N USB Adapters User Guide
33