Setup Network Configuration (Xp) - NetComm VELOCITY NP910n User Manual

Setup Network Configuration (XP)

• enter [Start menu]
• Select [Control panel]
• Select [Network Connections].
• right-click [Wireless Network Connection], under the LAN heading
• Select [properties]
• Select [Internet Protocol (tCP/IP)]
• Click [Properties].
• Select the [General] tab.
most Access Points/routers will support DHCP*, therefore select (a) to obtain addresses automatically. If you are unsure, select
option (a).
* Dynamic Host Configuration Protocol (DHCP) is a protocol used by networked devices to obtain the parameters necessary for operation in an Internet Protocol network. This
protocol reduces system administration workload, allowing devices to be added to the network with little or no manual configurations.
YmL���WN ���WN
www.netcomm.com.au
NetComm Velocity Series - Wireless N USB Adapters
TM
Wireless N USB Adapters User Guide Wireless N USB Adapters User Guide Wireless N USB Adapters User Guide Wireless N USB Adapters User Guide
11