Connections To Other Devices - Denon POA-3012CI - Multi-Zone Audio Distribution Power Amplifier Owner's Manual

Multi channel power amplifier
Hide thumbs Also See for POA-3012CI - Multi-Zone Audio Distribution Power Amplifier:
Table of Contents

Advertisement

ENGLISH
Modem
I
For connections to the Internet, contact an ISP (Internet Service
Provider) or a computer shop.
o
Others
• If you have an Internet provider contract for a line on which network
settings are made manually. make the settings at "Network Setup"
(@"page 15).
• With the POA-3012CI. it is possible to use the DHCP and Auto IP
functions to make the network settings automatically.
• When using a broadband router (DHCP function). the POA-3012CI
sets the IP address. etc,. automatically.
When using the POA-3012CI connected to a network with no DHCP
function. make the settings for the IP address. etc,. at "Network
Setup" (@"page 15l.
• The POA-3012CI is not compatible with PPPoE. A PPPoE-eompatible
router is required if you have a contract for a line of the type with
which the PPPoE is set.
-N'U-
• A contract with an ISP is required to connect to the Internet.
No additional contract is needed if you already have a broadband
connection to the Internet.
• The types of routers that can be used depend on the ISF' Contact an
ISP or a computer shop for details.
o
Broadband Internet Connection
A broadband line connection to the Internet is required in order to
use the POA-3012Cl's firmware update.
o
Modem
This is a device that is connected to the broadband line to
communicate with the Internet. Some are integrated with the
router
Required System
o
Router
• When using the POA-3012CI. we recommend you use a router
equipped with the following functions:
. Built-in DHCP (Dynamic Host Configuration Protocol) server
This function automatically assigns IP addresses on the LAN.
. Built-in 100 BASE-TX switch
When connecting multiple devices. we recommend a switching
hub with a speed of 100 Mbps or greater
o
Ethemet Cable (CAT-5 or greater recommended)
• The POA-3012CI does not come with an Ethernet cable.
• Some flat type Ethernet cables are easily affected by noise.
We recommend using a normal type cable.
• If the sound is broken in an environment in which there is much
power supply noise from electric products or in a noisy network
environment. use a shielded type Ethernet cable (For North
America modell.
• For the Ethernet cable. used a shielded twisted pair (STP) cable.
Do not use an unshielded twisted pair (UTP) cable. as it may exceed
noise standard limits (For Europe modell.
o
Computer
A computer with the following specifications is required to use a
server:
·OS
Windows® XP Service Pack2. Windows Vista
• Internet browser
Microsoft Internet Explorer 5.01 or later
• LAN port
gID
........--~~~
LAN port!
Ethernet
connector
~
~,
...
-~
(';:::::::~~--
Internet
Connections to Other Devices
'
(]I
To WAN side
-II
mJ
D~
To LAN port
C
To LAN port
(]I
D
Router
8

Advertisement

Table of Contents
loading

Table of Contents