Connecting The Power Cord; Once Connections Are Completed; Example Of Displav Of Default Values; Operations - Denon POA-3012CI - Multi-Zone Audio Distribution Power Amplifier Owner's Manual

ENGLISH
Connecting the Power Cord
Using the menu
o
To select the item to be set
Turn the
SELECT/ENTER
knob until the item you want to set
appears.
o
To enable lower level menu items to be displayed
Press the
SELECT/ENTER
knob or the \l button.
o
To return to higher level menu items
Press the
~IRETURN
button.
o
To confirm selected item
Press the
SELECT/ENTER
knob.
o
To exit SETUP mode
Press the
SETUP
button until the display returns to normal.
If you want to configure the settings for a specific ZONE, press
the
ZONE 1 - 6
button for the ZONE concerned and configure the
settings.
• In this case, the setting item of another ZONE is not displayed.
• To configure the settings for "DIMMER MODE" and "POWER
CONFIGURATION:' use the
SETUP
button to select "Main Setup"
mode.
ili" . .
c a··"
-
ZONE1-6
~JRETURN
SETUP
\1
c[
l
~-I----"'~~
SELECT/ENTER
Setup
In lists of selectable items or adjustable ranges, the item
surrounded by a border is the default value.
Example of Display of Default
Values
North America model:
To household power
outlet
(AC 120
V.
60 Hz)
:
l:J
...._-_. . . . : G)
Europe model:
To household power
outlet
(AC 230
V.
50 Hz)
Wait until all connections have been completed before connecting the
power cord.
Once Connections are Completed
@"
'0=0
12
_.
~
--
-----.
@}o~)
I ..
'@)o~
I
Turning the Power On
(rFpage 17)
.~[.u.
Insert the AC plugs securely. Incomplete connections could cause
noise.
[Selectable items]
I~PQJJt
I
,;!iID"
iP!!t.0~<
Operations
For all settings, refer to "Menu map" (Gf'page 11, 12).
For details of individual settings refer to the explanations of settings
(Gf'page 13 - 16).
1
Press the
SETUP
button.
The POA-3012CI enters the "SETUP" mode and the first level
menu is displayed.
The selected item blinks.
2
Select the required item on the menu and set it.
10