Knowing The Mixerset Command - Creative 16-Bit Sound Card User Manual

Knowing the MIXERSET Command

The Mixer is configured using switches that follow the MIXERSET
command.
To use the MIXERSET command:
1. Change to your sound directory.
2. Type MIXERSET [switches] ... and press <Enter>.
where switches can be one or a combination of any of the
following:
/? or /H Displays help messages.
/Q Runs MIXERSET without displaying the setting
information.
/P Sets the Mixer according to the PRESET settings in
the CTMIX.CFG file.
/MA:n;x Sets the MASTER volume and balance of left and
right channels.
/VO:n;x Sets the VOICE volume and balance of left and
right channels.
/MI:n;x Sets the MIDI volume and balance of left and right
channels.
/CD:n;x Sets the CD volume and balance of left and right
channels.
/LI:n;x Sets the LINE-in volume and balance of left and
right channels.
/MIC:n Sets the MICrophone volume.
/SP:n Sets the PC SPEAKER volume.
n specifies the volume level and ranges from 0 to 255.
x specifies the balance of the left and right channels,
and ranges from -5 to +5. x must be preceded by ';'.
8-2