Recording Wave Files - Creative 16-Bit Sound Card User Manual

To use the drag-and-drop method:
1. Start File Manager and open the wave file's directory.
2. Arrange both windows so that the file and the WaveEditor
3. Hold down the left mouse button as you drag the file into the
4. Drop the file by releasing the mouse button.
You can also open multiple files using the drag-and-drop method by
holding down <Shift> and clicking on the files in the File Manager.

Recording Wave Files

WaveEditor allows you to record new wave files or over existing
files.
To record a new file:
1. Choose New on the Toolbar.
2. Choose Record on the Toolbar.
3. Ensure the settings in the dialog box are specified correctly.
window can be seen.
WaveEditor window.
A icon appears while you are dragging the file.
The file opens automatically.
The New Recording dialog box similar to Figure 1-7 appears.
Figure 1-7: The New Recording dialog box.
K Check the Recording Level group box. If the recording
level is too low or high, adjust it using the Mixer button.
WaveEditor 1-11