Using The Mouse; Understanding Waveeditor Menus; File Menu - Creative 16-Bit Sound Card User Manual

Using the Mouse

An easy way of selecting wave files for editing is to use the mouse.
The following shows you how to use the mouse to select the data.
To select a portion of the data:
K Hold down the left mouse button anywhere on the Edit
To select the entire data:
K Double-click the wave data in the Edit Window.
To select data from a specific position to the beginning of the data:
K Hold down the left mouse button at the specific position and
To select data from a specific position to the end of the data:
K Hold down the left mouse button at the specific position and

Understanding WaveEditor Menus

WaveEditor has seven menus: File, Edit, View, Special, Options,
Window, and Help; and a context-sensitive menu.

File Menu

The File menu contains the following commands:
New
Open
Close
Close All
Save
Save As
Save All
Exit
WaveEditor keeps a record of the last four wave files you have
opened by displaying them on the File menu after the Exit command.
To open any of the files, select the file with the left mouse button.
Window and drag the mouse. Once the desired portion of the
data has been selected, release the left mouse button.
drag the mouse above the Edit Window.
drag the mouse below the horizontal scroll bar.
Creates a new window without any data.
Loads an existing wave file.
Closes an open wave file.
Closes all open wave files.
Saves changes made to the wave file.
Saves the wave file with a new name.
Saves all open wave files.
Quits WaveEditor.
WaveEditor 1-5