Using Record - Creative 16-Bit Sound Card User Manual

You need to take note of the following when using RECORD:
K If you enter RECORD without any parameters, the online
K If you did not specify the recording mode, sampling rate and
K If you want to stop the recording, press <Esc>.
K The recording will stop when the disk is full.
K A new file will be created or an existing file will be

Using RECORD

The following are some examples of how you can record sound files
in DOS:
K To record from CD into a sound file (SONG.VOC) in .VOC
K To record a sound file without displaying the recording
K To record a stereo sound file from a Line-in source in .WAV
description for using RECORD appears.
sample size, the sound will be recorded in mono 8–bit wave
file format with 11025 Hz sampling rate.
overwritten for recording.
format:
1. Play your CD in the background.
2. Type RECORD SONG.VOC /A:CD and press <Enter>.
information:
1. Type RECORD SONG.VOC /A:CD /Q and press <Enter>.
format with MULAW compression:
1. Type RECORD SONG.WAV /A:LINE /M:STEREO
/C:MULAW and press <Enter>.
RECORD Utility 7-3