Add Echo - Creative 16-Bit Sound Card User Manual

2. Select the desired channels. (No options are available for
3. Choose OK.

Add Echo

This effect modifies data in the wave file to give an echo effect. You
can create a metallic sound effect by continually applying Add Echo
to the same wave file until you have achieved the desired result.
To add echo to a file:
1. Select Add Echo from the Special menu.
Figure 1-11: The Reverse dialog box.
editing a mono file.)
K
Select Left Channel, Right Channel, or both channels for
stereo file.
The Add Echo dialog box similar to Figure 1-12 appears.
Figure 1-12: The Add Echo dialog box.
1-16