Exercise Modes; Run Mode - Schwinn 810 User Manual

Hide thumbs Also See for 810:
Table of Contents

Advertisement

The procedure in setting time 2 is the same with time 1 setting.
Display FORMAT setting:
You can select 12H or 24H format. Press S3 to enter setting mode. Press S1 or S5 to select
12H or 24H format. Press S3 to confirm and exit.

EXERCISE MODES

The watch has the following major exercise modes: RUN mode, and WAYPOINT mode. You
can also use the GO BACK and GO TO function of the RUN DATA mode. After setting the
watch and wearing your HRM belt (optional) the user can now start doing the various
exercise modes.

RUN mode:

Press S1 or S7 from Time mode to enter RUN mode. The watch will display the following in
succession:
RUN
RUN/ GPS/ INDOOR
BATTERY level
of RUN mode
The power level is displayed with an increment of 10%, from 10% to 100%. In Memory
display, the watch will display the remaining hours available in Track memory. Total
capacity is 60 Hours. Interval memory time per file is 0.5 hours.
If the power level of the battery is low, the GPS cannot be turned on. The watch will display
BATT.LOW after the screen RUN GPS INDOOR (GPS OFF).
Different views in RUN mode/ GPS ON:
Following are the various views that user can choose by pressing S11 in RUN mode.
GPS ON/ With HRM (14 Views):
View 1
Exercise time/ HR / Speed
DATA TRACK MEMORY
view 1
View 2
Exercise Time/ Distance
View 3
HR/ %Max HR/ Speed
View 4
PACE/ Calorie
View 5
Exercise time/ Distance/ HR
View 6
Exercise time/ Distance/ Clock
View 7
Exercise time/ Distance / Speed
View 8
Exercise time/ Distance/ Pace
View 9
Exercise time/ Distance/ Calorie
View 10
Exercise time/ HR/ %Max HR/ Calorie
View 11
Exercise time/ Distance/ Speed/ Calorie
View 12
Exercise time/ Distance/ Pace/ Calorie
View 13
Exercise time/ HR/ %Max/ Calorie/ In Zone
View 14
Track map with Speed/ Distance/ Exercise
Time
GPS ON/ Without HRM :
The views will follow the views above because every time you will push S11 to change
views, the watch will start to search for HRM signal. But if there is no HR signal after 2
minutes, the watch will display Exercise Time, Distance, and Speed.
GPS OFF with HRM:
View 1
HRM/ % Max/ Exercise Time
View 2
Exercise Time/ HRM/ % Max
View 3
HR/ %Max HR/ Calorie/ In Zone
View 4
HR/ %Max HR/ Calorie/ Clock
View 5
Exercise Time/ HRM/ % Max HRM/ calorie/ In Zone
GPS OFF/ Without HRM
BD26

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents