Schwinn 810 User Manual page 12

Hide thumbs Also See for 810:
Table of Contents

Advertisement

Setting the User's information:
Press S5 when the USER option is highlighted. The sequence of setting is as follows: Units
Gender
Age
Weight
Height
Zone Alarm ON/OFF. Press S1 to increase adjust. Press S3 to decrease adjust. Press S5 to
set next parameter. Press S7 to exit.
Heart rate range: 30 to 240 BPM
Weigh range : 20 to 255 Kg ( 44 to 561 Lbs) default is 65 Kg (143 Lbs)
Height range: 91-241 cm(2'11"-7'10" ft' inch") default is 170 cm
Age Range: 7 to 99 Default is 25
Sex/ Gender : Male or Female, default is Male
Units: KM/M/KG or MI/FT/LBS
Max HR = 220- Age
Low Limit setting range = 30 BPM to High limit value
High Limit setting range = Low Limit Value to 240 BPM
HR Zone Table:
Setting the Auto Lap:
1.
Press S3 to set the Auto lap.
2.
Press S1/S5 to select the various settings. Following are the auto lap preset range: OFF,
0.5 Km, 1 Km, 2 Km, 3 Km, and 5 Km. Default value is 1.0 KM.
3.
Press S3 to save the selection and exit.
HR Zone 1/2/3
Lower Limit
Higher Limit
SET TIME:
The procedure in setting the time is the same in time setting in TIME mode except the last
step is going back to SET TIME sub menu instead of going back to TIME mode.
Setting the SYSTEM:
1.
Press S3 when System is highlighted. Parameters to set under System are: Contrast,
Key tone, and Night mode.
2.
Press S1/S5 to toggle through these parameters.
3.
Press S3 to enter selected parameter.
4.
Press S1/S5 to change values.
5.
Press S3 to confirm setting.
6.
Press S7 to exit.
Contrast Range is 0 to 100%.
Key tone: You can set the key tone ON or OFF. If key tone is on, there is confirmation sound
every time you press a button.
When NIGHT is ON, pressing any key can turn ON EL for 5-6 seconds from 6 pm to 7 am.
When Night is OFF, press S5 will turn on the EL back light. Other buttons will have no light
function.
Viewing PRODUCT ID:
Press S3 when PROD. ID is highlighted to View the current Software code of the watch.
Press S7 to exit.
EXIT :
Press S3 to exit to Time mode. Nothing to set here.
Battery:
Watch is using a rechargeable Lithium Ion battery that will require approximately 4 hours
charging time using the USB cable. While battery is charging, the watch cannot be used and
all buttons are disabled. User needs to recharge the battery when the watch indicates a low
battery level.
Battery Life: Approximately 8 to 10 hours in training mode.
BD26

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents