Schwinn 810 User Manual page 13

GPS watch troubleshooting guide:
PROBLEM/ QUESTION SOLUTION/ ANSWER
Press and hold S9 for 5-6 seconds from any view to turn
How to turn off the GPS OFF the GPS.
Take your GPS watch outdoors and away from tress and
I cannot get a GPS signal tall buildings. Remain stationary and try acquiring GPS
signal again. Be sure that the antenna is pointing towards
the sky for better signal reception.
You can reset the watch by pressing S1, S5, S7, and S11
Can I reset the watch? together. The date and time will be reset to default
values. You can set it again manually or automatically thru
GPS.
Will my data and personal Your data and personal settings are saved in the flash
settings be lost after watch memory and will not be lost after watch reset.
reset?
The battery indicator does Allow your GPS watch to fully discharge and then fully
not seem to be accurate charge it without interruption. It is recommended to
regularly re-charge your battery every 1-2 months even if
it is not used to maintain good battery condition.
- Make sure the HR belt is snugly fit to your body
My heart rate data seems - Reapply water, saliva, or electrode gel to the electrode
inaccurate. of the HR belt
- Clean the electrodes from possible contamination that
may interfere with heart rate signals
- Wear a cotton shirt or if possible, wet your cotton shirt.
Synthetic fabrics that rubs with your skin may create
static electricity and interfere with the heart rate signal
- Move away from strong electromagnetic fields and other
wireless sensors which can interfere with your heart rate
sensor. Possible sources of wireless interference may
include high voltage power lines, electric motors,
microwave ovens, cordless phones, and wireless LAN
or access points.
BD26