Schwinn 810 User Manual page 6

this manual for the complete list of city codes and corresponding GMT differential
time.
View 4 Time 1, Date of Time 1, Time 2, Date of Time 2, GPS relative signal strength.
View 5 Alarm time (1-5), Alarm referred to Time 1 or timer 2, battery level indicator, GPS
relative signal strength. While in view 5, press S5 to scroll through alarm 1 to 5.
Press S1 to turn ON or OFF the selected alarm. View 5 will automatically go to
view 1 after 5 seconds.
While in view 5, press S5 to scroll through alarm 1 to Alarm 5. To turn ON or OFF the
selected alarm, press S3.
TIME sub modes:
From any view in TIME mode, press S5 (if EL is ON) or double press S5 (if EL is OFF) to
enter the time sub modes. In these sub modes, you can set the ALARM, TIME 1, TIME 2,
and display FORMAT. Press S1/S3 to scroll through these sub modes.
Alarm setting:
Select ALARM by pressing S3
Select ALARM 1 to ALARM 5 by pressing S1 or S5 and then press S3 to enter.
Set the HOUR. Press S1/S5 to change values. Press S3 to enter
Set the MINUTE. Press S1/S5 to change values. Press S3 to enter
Set the alarm time referred to TIME 1 or TIME 2. Press S1/S5 to change values. Press
S3 to enter
Set the alarm ON or OFF. Press S1/S5 to change values. Press S3 to enter
TIME 1 setting:
You have two options in setting the watch, AUTO or MANUAL. In manual setting, you can
manually set the time. If you select the AUTO option, the watch will be automatically set
base on the data and time data from GPS satellites.
Select TIME 1 by pressing S3
Select AUTO or MANUAL setting by pressing S1 or S5 and then press S3 to enter.
AUTO setting:
o Select TIME ZONE by pressing S1/S5 and then press S3 to enter. There are 106 cities
to select in this time zone setting.
o Select DST ON or OFF by pressing S1/5 and then press S3 to enter.
o The watch will display the CONFIRM screen and then go back to view 1 of Time 1
MANUAL setting:
o Set the HOUR by pressing S1/S5 and then press S3 to enter.
o Set the Minute by pressing S1/S5 and then press S3 to enter.
o Set the SECOND by pressing S1/S5 and then press S3 to enter.
o Set the YEAR by pressing S1/S5 and then press S3 to enter..
o Set the MONTH by pressing S1/S5 and then press S3 to enter.
o Set the DATE by pressing S1/S5 and then press S3 to enter.
o The watch will display the CONFIRM screen and then go back to view 1 of Time 1
TIME 2 setting:
You have two options in setting the watch, AUTO or MANUAL. In manual setting, you can
manually set the time. If you select the AUTO option, the watch will be automatically set
base on the data and time data from GPS satellites.
BD26