Zanussi ZOD580 User Manual page 7

Oven function
Dual Circuit Grill
Conventional Cooking
Bottom Heat
Defrost
Clock Functions
• Countdown
- See appropriate chapter on setup. A
signal sounds after the time has elapsed. This function
does not affect the functioning of the oven.
• Cook time
- is used to set the desired period of
cooking time.
• End time
- when set the appliance is turned off
at desired time.
• Time
- shows the current time.
How to use the clock functions
• After a function has been selected, the corresponding
function indicator flashes for about 5 seconds. During
this period, the desired times can be set using the in-
crease or decrease
• When the desired time has been set, the function in-
dicator continues to flash for approx. 5 seconds. After
that the function indicator is then lit. The set time be-
gins to run.
• Press any of the buttons to stop the audible signal.
• The desired oven function and temperature can be se-
lected before or after the clock functions Cook time
and End time
• When the cooking process is completed, turn the oven
function dial and the temperature selector back to the
OFF position.
Countdown
1. Press the Mode
tion indicator Countdown
For grilling flat foodstuffs in large quantities and for toasting.
This form of cooking gives you the opportunity to cook without the fan
in operation. It is particularly suitable for dishes, which require extra
base browning such as pies, quiches and flans. Gratin's, lasagne and
hot pots which require extra top browning also cook well in the con-
ventional oven. For best results cook on one level.
For baking cakes with crispy or crusty bases.
For defrosting e. g. flans and gateaux, butter, bread, fruit or other frozen
foods.
button.
are set.
button repeatedly until the func-
flashes.
Application
2. Using the increase
desired Countdown (max. 2 hours 30 minutes).
3. After approx. 5 seconds the display shows the time
remaining. The function indicator Countdown
lights up.
4. When the time has elapsed, the function indicator
flashes and an audible signal sounds for 2 minutes.
The signal can be stopped by pressing any button.
Cook time
1. Press the Mode
tion indicator Cook time
2. Using the increase
desired cooking time.
After approx. 5 seconds the display returns to show-
ing the current time. The function indicator Cook time
lights up.
When the time has elapsed, the function indicator
flashes, an audible signal sounds for 2 minutes and
the oven switches itself off.
3. The signal and the programme can be stopped by
pressing any button.
End time
1. Press the Mode
tion indicator End time
2. Using the increase
desired switch-off time.
After approx. 5 seconds the display returns to show-
ing the current time. The function indicator End time
lights up.
or decrease button set the
button repeatedly until the func-
flashes.
or decrease button set the
button repeatedly until the func-
flashes.
or decrease button set the
7