Enter An Airway In A Flight Plan - Garmin G1000 Reference Manual

8.8 ENTER AN AIRWAY IN A FlIGhT
PlAN
1) Press the FPL Key to display the active flight plan
or display a stored flight plan.
2) Press the FMS Knob to activate the cursor.
3) Turn the large FMS Knob to highlight the waypoint
before which the airway is to be entered.
Figure 8-13 Airway Insertion Point
4) Turn the small FMS Knob to display the Waypoint
Information Window and begin entering the desired
airways entry point.
Figure 8-14 Load Airway entry Point
190-00384-09 Rev. A Garmin G1000 Cockpit Reference Guide for the Cessna Nav III
SECTION 8 – FLIGHT PLANNING
5) When the desired entry point is entered, press the
eNT Key.
Figure 8-15 Airway entry Point Loaded
6) Turn the small FMS Knob to display the Waypoint
Information Window and begin entering the desired
airway identifier.
Figure 8-16 enter Airway Identifier
7) When the desired airway is entered, press the LD
AIRWY Softkey.
8-5