Switching Rotary Modes; About A Shortcut; Creating A Shortcut - Eclipse CD5030 Owner's Manual

Names of controls and parts

Switching Rotary Modes

The [VOL] knob can be switched to other
functions. When the rotary mode is set to ON,
you can switch from the volume adjustment
function to the following functions by pressing the
[VOL] knob.
Source
FM/AM TUNE UP/DOWN
XM Channel Up/Down
SIRIUS Channel Up/Down
CDP/CDC Track Up/Down
MP3/WMA
- Folder search
USB
- Folder search
iPod
For detailed information on the above functions,
refer to the operation instructions for each related
audio source.
Press the [MODE/TAG] button
1
while the main unit is set to any
audio mode.
Rotary mode will switch ON. When
rotary mode is set to ON, the rotary
indicator will be displayed as follows.
If the [MODE/TAG] button is pressed
again, or if
performed for more than 10 seconds,
the rotary mode will be cancelled.
18
Function Page
40
92
95
27
- File search
27
- File search
27
Track search 99
Rotary indicator
no operations are

About a shortcut

Create a shortcut for frequently-used functions
so that they can be recalled with a single
operation.

Creating a shortcut

A shortcut can be created for one of the
following MENU mode adjustment functions:
sound adjustment mode, display adjustment
mode, or function mode.
Switch to the mode that you want
1
to create a shortcut for.
Refer to the explanation for each adjustment
mode for more information on switching them.
• Sound adjustment mode: Page 68
• Display adjustment mode: Page 75
• Function mode: Page 79
Press the [ /MENU] button for
2
more than one second.
A shortcut will be created. If the [
MENU] button is not held down more
than one second, the shortcut is not
created and the main unit returns to
the previous audio mode.
ATTENTION
• If you attempt to create a shortcut for a
hierarchy where this is not possible, the
system will beep twice when [
button is pressed for more than one
second. (The beep sounds only when the
Guide Tone is set to ON.)
• Depending on the audio mode and the
system setting, it may not be possible to
operate the shortcut function. In this case,
the system will beep twice when the [
MENU] button is pressed. (The beep
sounds only when the Guide Tone is set to
ON.)
• Only one shortcut
registered. If a shortcut has already been
registered, its key will be deleted when a
new shortcut is created.
/
/MENU]
/
function can be