Connecting The Main Unit And The Portable Device - Eclipse CD5030 Owner's Manual

Select "ON" or "OFF" by pressing
6
the [ ] or [ ] button.
ON:
Enables BT-Audio
OFF:
Disables BT-Audio
Press the [ /BAND] button.
7
The portable device is set as a
Bluetooth audio source.
ATTENTION
• The Bluetooth audio (BT-Audio) function
can only be selected in the audio mode
when the BT Audio Set selection mode is
set to ON.
• The default setting for the Bluetooth audio
mode is OFF (BT-Audio
disabled).
Connecting the main unit and the
portable device
In the BT Audio Setting selection
1
mode, select "Connect" by
pressing the [ ] or [ ] button.
Press the [ENTER] button.
2
The "Waiting" message appears on
the display.
ATTENTION
Press the [ /BAND] button to change the
portable device to be connected. The BT
Audio Setting selection mode will be activated
again.
Input the passcode using the
3
portable device.
The default passcode is 1234.
• For details on how to operate the portable
device, read its instruction manual.
• Be sure to perform the connection of the
portable device only while the "Waiting"
message is on the display.
4
selection is
• If the portable device is still connected,
disconnect it.
• If the connection has failed and the
"FAILED" message appears on the display,
connect the portable device again in the BT
Audio Setting selection procedure of Step 1.
• The passcode is a password used when
connecting the portable device to the main
unit.
• When the audio of the cell phone is
connected, hands-free can be connected at
the same time for some devices. If you want
to be able to use the hands-free function,
perform
procedure again.
The Bluetooth audio function
ATTENTION
When the connection has been
completed, the "COMPLETED"
message appears on the display.
The portable device is connected to
the main unit.
( and appear on the display.)
If the connection has not been
successfully completed, the "FAILED"
message appears on the display.
ATTENTION
the hands-free
VI
connection
37