If You Have A Question; Displayed Information (For Troubleshooting) - Eclipse CD5030 Owner's Manual

Other information

If you have a question:

Other information
Check the items mentioned below before attempting to troubleshoot problems.
CAUTION
1 2
If a problem occurs, for instance when the main unit does not respond to any button presses, or the
display doesn't work correctly, press the [RESET] button using a paper clip or similar item.
Pressing the [RESET] button will delete all the entries from memory. The settings will return to
those made at the factory prior to shipment.

Displayed information (for troubleshooting)

The information listed in the chart below is displayed to show the status of the CD, USB memory, XM
Radio, Sirius Radio, iPod, CD changer or Bluetooth, etc. Refer to the chart for details of the appropriate
remedial action to be taken.
Information
INFO 1 CD CHANGER SHUTTER IS
OPEN
INFO 2 NO DISC IN THE MAGAZINE
INFO 3 DISC IS DIRTY OR DAMAGED
INFO 5 CD PLAYER AND CD
CHANGER MECHANICAL
FAILURE IS OCCURRING
INFO 6 INTERNAL TEMPERATURE OF
CD PLAYER AND CD
CHANGER IS HIGH (PICKUP
UNIT PROTECTION)
104
Explanation and remedial action
Close the shutter.
There is no disc in the magazine or player. Load a disc into
the magazine. (Load a music disc.)
The loaded disc is dirty or upside down. Check its orientation
and whether it is clean.
• The CD player and CD changer are inoperative for some
reason. Go through the magazine removal procedure.
• If the magazine fails to eject, have your dealer fix the
problem.
• For the CD player, hold down the [e (EJECT)] button for
more than five seconds. If no response, contact your
dealer.
• The temperature in the CD player and CD changer is too
high for operation. Wait till they cool down.
• Resume playback after the "High temperature sensed
and CD stopped" display disappears. If the CD still cannot
be played, have your dealer fix the problem.