Basic Operation Of The Uc5 - Ricoh UC5 Operator's Manual

Basic Operation Instruction of the UC5.
After you have completed all the installation procedures and loading of the relevent
driver for the Digital Duplicator you are printing to, the UC5 is ready for use.
Powering the UC5 on.
The power button is located on the back panel of the UC5. Insert the power cord
and switch the mains on. Switch the UC5 on at the back panel of the unit. The
green light on the front will indicate that the unit has power. This light remains on
until such a time as the switch is turned off at the back panel. On power up the red
light will flash once very quickly and then flash on and off depending on the version
of firmaware installed. For example: 4 flashes for version 4 and 3 flashes for
version3. The red light will then stay on for 6 seconds and then switch off. The
UC5 is now ready to receive a print job.
Powering the UC5 off.
To turn the UC5 off, switch off the power button located on the back panel and
disconnect the power cord from the mains.
Printing to the UC5.
To print to the UC5, select the print option from the file menu of your application.
In the print dialogue window select the ZipRip driver you have installed (NB if you
are unsure as to which machine model you have refer to the Generic Driver List on
page 6 of this manual)and the quantity you wish to print. In the properties section
in the print dialogue box you can choose what size paper you are printing on and
select a paper tray if your machine support this feature. Once you have made your
selections press "Print" or "OK" depending on your application. The file is proc-
essed by your computer and transfered to the UC5. The red light on the UC5 will
begin to flash rapidly indicating it is receiving and processing your file. Once the
file is transfered your Digital Duplicator will cut a master and print the quantity you
have specified.
32