Ricoh UC5 Operator's Manual page 27

If "Local printer" was selected then a list of available ports will be displayed as
illustrated below. Select the port you have connected the UC 5 to and click "Next".
LPT1: is the most likely port to be used.
If "Network printer" was selected then a dialogue box will appear asking for you
to specify the network path of the shared printer. Enter the network path and
continue the installation.
After defining the port to be used Windows 2000 displays a dialogue box listing
standard drivers supplied on the Windows 2000 operating system CD. The UC 5
drivers must be installed from the supplied UC 5 CD ROM. Click "have disk" at
this dialogue box.
27