(3) Operation Check
1. Install the USB flash drive (part no.2).
2. Access HELP-073.
3. Touch the "screen switch button" in the lower
right corner of the screen to display the next
page.
4. Touch ":USB FLASH DRIVE OPERATION
CHECK" and press the MASTER MAKING
key.
Confirm that "OK" appears on the screen
when OPERATION CHECK finishes.
(Format the USB flash drive data if NG is
displayed.)
5. Press the RESET key to return to the main
screen.
6. Touch "PROPERTY".
7. Touch "PERIPHER".
Chapter 2
USB slot Type D1
9
2
95