Testing Your Uc5 - Ricoh UC5 Operator's Manual

Testing your UC5

Once you have set up the UC5 you can produce a test page before continuing to
install the printer drivers on your computer.
To produce a test page, put your Digital Duplicator "on-line" and press the green
button at the back of the UC 5.
After a short delay a test page should be printed. The test page should look like
the illustration below.
Note that the test page will print as an A4 sheet on a 300dpi Digital Duplicator. If the
Digital Duplicator has a higher resolution then the output will appear smaller. - This
is normal.
If a test page is not created correctly, then refer to the section "Troubleshooting
your UC5".
9